Skip to content
OCA LCD Screen Repair Automatic OCA Polarizer Film Applicator Machine For Phone Refurbish Laminating OCA Glue Polarizer Adhesive
1.Machine introduction
1.1 G+F flap film laminating machine is touch screen and OCA film laminating. When the OCA film and glass alignment adjust is completed, press the start button, the flip table will turn over, and the motor will drive the platform forward for lamination.
1.2 This equipment is suitable for the lamination process of glass panel and film with size 500*700mm.
1.3 Film laminating for 1pcs, the running time is 20–30 seconds, can finish about 1200 pieces in 10 hours.
1.4 Machine Size: Length: 1960mm Width: 980mm Height: 1060mm Gross Weight: About 575KG Air source: 4-6Kg/cm2 Power: 220V/1KW/50HZ
1.5 Main parts: Frame (sheet metal, aluminum alloy), PLC touch screen, cylinder, solenoid valve, blower fan, roller, flap platform, servo motor, speed reducer.
Frequently Asked Questions
What is the maximum panel size this OCA film laminating machine can handle?
This machine supports glass panel and film lamination up to 500×700mm, making it suitable for a wide range of phone and tablet screen sizes.
How fast is the lamination cycle per piece?
Each lamination cycle takes 20–30 seconds per piece. In a 10-hour production run, the machine can complete approximately 1,200 pieces.
What power supply and air source does this machine require?
The machine operates on 220V/1KW/50Hz power and requires an air source of 4–6 Kg/cm². Please ensure your facility meets these requirements before installation.
Is the machine controlled manually or automatically?
The machine uses a PLC touch screen interface for semi-automatic operation. Once alignment is set, the lamination process runs automatically with a single button press.