air bubble remover machine

Air Bubble Remover Machine. Professional autoclave machine for removing air bubbles from OCA-laminated LCD and OLED screens. Applies controlled high-pressure air to dissolve trapped bubbles in the adhesive layer, ensuring optically clear results for smartphone and tablet screen refurbishment.

Frequently Asked Questions

What air pressure does this air bubble remover machine operate at?

This machine typically operates at 3–6 bar (45–90 psi) of air pressure inside the sealed chamber. The exact pressure setting depends on the OCA film type, screen size, and bubble severity. Refer to the machine manual for recommended pressure settings for your specific application.

How long should screens remain in the air bubble remover machine?

A standard cycle is 15–30 minutes at the recommended pressure. Larger screens or thicker OCA films may require longer cycles. Do not open the machine during pressurization. Allow the pressure to fully release before removing screens.

Can this air bubble remover machine process screens from different phone models simultaneously?

Yes, multiple screens from different phone models can be processed in the same cycle as long as they fit within the machine chamber. Mixing screen sizes in one batch is common practice in high-volume repair shops to maximize efficiency.

What should I do if bubbles reappear after the air bubble removal cycle?

If bubbles reappear after the autoclave cycle, the OCA adhesive may not have been fully cured or the pressure cycle was too short. Run a second autoclave cycle with slightly higher pressure or longer duration. If bubbles persist, the OCA film may need to be replaced.