Skip to content
Bubble Remover Machine. Professional autoclave bubble removal machine for eliminating air bubbles from OCA-laminated smartphone and tablet screens. Uses high-pressure air to compress and dissolve bubbles in the OCA adhesive layer, producing optically clear, bubble-free lamination results.
Frequently Asked Questions
How does a bubble remover machine eliminate bubbles from OCA lamination?
The bubble remover machine (autoclave) applies high-pressure air (typically 3–6 bar) at elevated temperature to the laminated screen. This pressure compresses any remaining air bubbles in the OCA adhesive until they dissolve into the adhesive layer, making them permanently invisible.
How long does a bubble removal cycle take in this machine?
A standard bubble removal cycle takes 10–20 minutes at the recommended pressure and temperature settings. After the cycle, screens should be inspected under bright light to confirm all bubbles have been eliminated before proceeding to the next repair step.
What pressure and temperature settings are recommended for OCA bubble removal?
Typical settings are 3–6 bar pressure at 40–60°C for 10–20 minutes. Exact settings depend on the OCA film type and screen size. Always start with lower pressure and temperature and increase gradually if bubbles persist. Refer to the machine manual for recommended settings.
Is a bubble remover machine necessary if I use a vacuum laminating machine?
Vacuum lamination significantly reduces bubble formation, but small bubbles can still appear, especially on larger screens or with thicker OCA film. An autoclave bubble remover is recommended as a final step to ensure completely bubble-free results, particularly for high-quality refurbishment operations.