Skip to content
Bubble Remover for LCD Screens. Autoclave bubble removal machine specifically designed for removing air bubbles from OCA-laminated LCD screens after the lamination process. Ensures optically clear, professional-quality results for smartphone and tablet LCD screen refurbishment.
Frequently Asked Questions
When should I use a bubble remover after LCD lamination?
Use the bubble remover immediately after OCA lamination, before the adhesive fully cures. Processing within 30 minutes of lamination gives the best results, as the OCA adhesive is still soft enough for bubbles to be compressed and dissolved under autoclave pressure.
What pressure and temperature settings are recommended for LCD bubble removal?
Standard settings for LCD bubble removal are typically 3–5 bar pressure at 40–60°C for 15–20 minutes. Exact settings depend on the OCA film type and LCD panel size. Always refer to the machine manual and OCA manufacturer guidelines for optimal parameters.
Can this bubble remover damage the LCD panel during processing?
No, when operated within the recommended pressure and temperature limits, this machine will not damage the LCD panel. The pressure is applied uniformly and is well within the structural limits of standard smartphone and tablet LCD panels.
How many LCD screens can be processed in one bubble removal cycle?
The number of screens per cycle depends on the machine chamber size. Most standard bubble removers can process 5–20 smartphone screens per cycle. Please contact our team for the specific batch capacity of this model.