• G+G Full Laminating Machine
  • G+G Full Laminating Machine
  • 500×700mm Large-size
  • 500×700mm Large-size
1 4

JiuTu Machine

G+G Full Laminating Process for OCA SCA COF OCF TPF Glue Hot Melt Laminating Vacuum Laminating Machine

G+G Full Laminating Process for OCA SCA COF OCF TPF Glue Hot Melt Laminating Vacuum Laminating Machine

$15,000.00 USD
$16,999.00 USD $15,000.00 USD
Распродажа Продано
Стоимость доставки рассчитывается при оформлении заказа.

G+G Full Laminating Machine

The G+G Full Laminating Machine, model 9TU-M041, is a vacuum laminator for big flat-panel display production. It supports G+G bonding with SCA and OCF hot-melt processes and G+G bonding using OCA adhesive processes.

Materials and construction

  • The stage is precision-machined from imported aluminum for hardness and equipment stability.
  • The heating platform uses uniform heating pipes and an imported aluminum platform for temperature uniformity and hot-melt bonding stability.
  • The equipment action is cylinder-driven.

Specifications and features

  • Laminating area: 520 × 720 mm; compatible stage size: 510 × 710 mm.
  • Maximum splicable product size: 30 inches.
  • Voltage: 220 V, 50 Hz; rated power: 7 kW.
  • Set temperature range: 0–99°C; the heating system can be set up to 100°C.
  • Laminating pressure: 0.5–0.8 MPa; work pressure: 4–6 bar.
  • Maximum pressure: 1.2 tons.
  • Precision: ±0.1 mm; machine dimensions: 1500 × 1050 × 1460 mm; weight: 500 kg.
  • PLC programming control provides automatic equipment operation, parameter setting, and monitoring through a man-machine interface.
  • Over-temperature alarm stops heating, while an over-pressure alarm activates gas-breaking protection.
  • The working platform includes an adjustable balance function.

Use cases

This vacuum laminator is intended for production processes involving large flat-panel displays, including mobile-phone lamination, SCA glue hot-press lamination, car-navigation lamination, and laboratory research and development. It is suitable for manufacturers and laboratories working with G+G bonding, OCA lamination, SCA or OCF hot-melt lamination, and vacuum lamination of products up to 30 inches.

Depending on product requirements, the process can begin with vacuum extraction followed by vacuum lamination. When heating is required, the upper and lower plates can heat to the set temperature before vacuum extraction and vacuum lamination.

Included and customization

The listing provides the 9TU-M041 vacuum laminator. The equipment can be customized according to customer requirements. No additional accessories are specified.

Care and operation

Operation uses PLC controls and the man-machine interface to set and monitor fitting parameters. The listing specifies over-temperature and over-pressure protection. Cleaning instructions and warranty terms are not specified.

Name
Vacuum laminator
Voltage
220V 50HZ
Laminating pressure
0.5-0.8Mpa
Machine size
1500*1050*1460MM
Model
9TU-M041
Power
7KW
Work Pressure
4- 6bar
Laminating area
520mm*720mm
Temperature
0- 99°C (set)
Precision
±0.1mm
Weight
500KG

 

Can Customized based on customer’s requirements 

Function : Applicable to the production process of big flat panel display industry, including G+G bonding in hot melt process such as SCA/OCF, G+G bonding in OCA process

Main Features :

1 The equipment adopts PLC programming control, PLC is used as the control center of the whole system to realize the fully automatic operation of the equipment and each The setting of the operating parameters. The equipment is equipped with a man-machine interface, which is convenient for the user to adjust and monitor the fitting parameters according to the production situation.

2 The maximum splicable product size is 30 inches (applicable to the size of the stage is 510mmx710mm), which is compatible with small size, and the stage is compatible. It is precision machined from imported aluminum to ensure the hardness and stability of the equipment.

3 The heating platform of the equipment is heated by uniform heating pipes, the temperature uniformity is good, the product is not polluted, and the platform is imported. The aluminum is precision machined to ensure the stability of the hot melt G+G bonding process.

4 The equipment has over-temperature alarm stop heating, over-pressure alarm gas-breaking function, high safety factor and simple operation

Specification :

  1. Using up and down heating, the temperature can be set up to 100 degrees.
  2. The working platform can adjust the balance function.
  3. The maximum pressure can reach 1.2 tons.
  4. The action of the equipment is driven by a cylinder Working

principle : According to the product feature , you can do vacuum extraction first then start vacuum lamination , or if temperature is needed , you can wait both the top and bottom plate to heat up and reach the set temperature ,later you do vacuum extraction and vacuum lamination

Working area :

1, Mobile phone laminating

2, SCA glue hot pressing lamination,

3, Car navigation lamination

4, Laboratory research and development equipment

Просмотреть всю информацию

Frequently Asked Questions

What types of bonding processes can the vacuum laminator support?
The vacuum laminator is suitable for G+G bonding in hot melt processes such as SCA/OCF and G+G bonding in OCA processes, making it ideal for large flat panel display production.
How does the PLC control system benefit the operation of the vacuum laminator?
The PLC control system enables fully automatic operation and easy adjustment of operating parameters via a man-machine interface, simplifying the production process and enhancing precision.
What is the maximum product size the laminator can handle?
The equipment supports a maximum splicable product size of 30 inches, with a stage size of 510mm x 710mm, suitable for both small and large flat panel displays.
What safety features are included in the vacuum laminator?
The laminator is equipped with over-temperature alarm stop heating and over-pressure alarm with gas-breaking function, ensuring high safety during operation.
Can the vacuum laminator be customized to specific customer needs?
Yes, the laminator can be customized based on customer's requirements, allowing for tailored solutions in various industrial applications.
What types of products are suitable for this vacuum laminator?
This vacuum laminator is ideal for large flat panel displays, including G+G bonding in hot melt processes such as SCA/OCF and G+G bonding in OCA processes, making it suitable for various flat panel display industries.
What are the safety features of this vacuum laminator?
The equipment includes over-temperature alarm stop heating, over-pressure alarm gas-breaking functions, and a user-friendly man-machine interface, ensuring high safety during operation and easy adjustment of parameters.
Can the laminating size be customized to fit different product dimensions?
Yes, the laminator can be customized based on customer requirements, allowing for adjustments to accommodate different product sizes and production needs.