HMI Touch Panel Laminating Equipment

The CG+OCA Vacuum Laminating Machine provides high-quality, bubble-free optical bonding of cover glass to display panels, ensuring clear, durable, and professional results for smartphone and tablet screen repairs.

Yes, this machine is suitable for both manufacturing and refurbishment purposes, offering precise lamination for replacing cracked or damaged cover glasses in smartphones and tablets.

The machine is equipped with a precision alignment system that helps accurately position the cover glass on the display, reducing misalignment and improving the overall quality of the optical bond.

Yes, it is compatible with commonly used OCA film thicknesses ranging from 100μm to 250μm, allowing flexibility for various repair and manufacturing needs.

While some models include integrated bubble removal features, it is recommended to use an autoclave for effective bubble elimination after lamination. Please check with our team to determine the best setup for your workflow.

The CG+OCA Vacuum Laminating Machine bonds Cover Glass (CG) to a display assembly using OCA (Optically Clear Adhesive) film. It is designed for smartphone and tablet screen refurbishment and manufacturing.

The product description says the machine uses vacuum lamination to produce high-quality, bubble-free optical bonding. An autoclave bubble-removal step is recommended afterward to address any residual air bubbles.

The description recommends an autoclave bubble-removal step after CG+OCA lamination but does not confirm whether one is included. It notes that some models may have integrated bubble removal, so contact the team to confirm the setup for this model.

The machine is described as compatible with standard OCA film thicknesses commonly used for smartphone and tablet screen refurbishment, typically 100μm to 250μm. Confirm your specific film requirements with the team.

The CG+OCA Vacuum Laminating Machine features a precision alignment system to position the cover glass relative to the display panel before lamination. The product description says this helps minimize misalignment that could affect display quality or touch performance.

The 9TU-M068S is designed for industrial display production, including LCD modules, TP/LCM assemblies and industrial HMI touch panels. Its stated effective area supports displays up to 27 inches, subject to the panel fitting the platform and machine limits.

The heated platform measures 550 x 380 mm and accepts panels up to 40 mm high. The component and any fixture need to fit within the working area.

A transparent acrylic dust cover shields the bonding chamber and helps keep dust out of the laminating area. Two vacuum meters monitor the circuit, while the chamber draws the film and panel together to remove residual bubbles under controlled temperature and pressure.

The machine has separate controls for positive pressure and back pressure, supporting soft-to-soft, soft-to-hard and hard-to-hard bonding. Its description identifies it as an SCA/OCA vacuum laminating machine for compatible display production workflows.

The dual infrared light barriers guard the platform zone from both sides. If a hand enters during a cycle, the mechanism stops and resumes once the area is clear; the machine also has an emergency stop button and an audible fault alarm.

Its 550 x 380 mm heated platform is designed for LCD modules, TP/LCM assemblies and industrial HMI touch panels up to 27 inches. It accommodates rigid, curved and thick panels up to 40 mm high.

A smart PLC touchscreen runs the bonding cycle and displays upper and lower platen temperatures and cycle time. Separate displays and knobs let operators set positive pressure and back pressure independently for soft-to-soft, soft-to-hard and hard-to-hard bonding.

The chamber pulls the film and panel together evenly under controlled temperature and pressure to remove residual bubbles. Two vacuum meters monitor the vacuum circuit during the process.

Yes. A transparent acrylic dust cover shields the bonding chamber and helps keep dust out of the laminating area during bonding.

Dual infrared light barriers guard both sides of the platform and stop the mechanism if a hand enters the protected area during a cycle. The machine also has an emergency stop button, automatic electrical trip on leakage and an audible fault alarm.

The 9TU-M068S is designed for LCD modules, TP/LCM assemblies, and industrial HMI touch panels up to 27 inches. Its 550 × 380 mm heated platform accommodates rigid, curved, and thick panels up to 40 mm high.

The product description says the machine handles many display sizes within its effective area without tooling changes. Components and fixtures must fit the 550 × 380 mm platform.

A smart PLC touchscreen runs the bonding cycle and displays upper and lower platen temperatures and cycle time. Separate displays and control knobs let operators set positive pressure and back pressure independently.

Two vacuum meters monitor the circuit while the chamber draws the film and panel together evenly. The product description states that this process removes residual bubbles under controlled temperature and pressure.

Dual infrared light barriers monitor both sides of the platform and stop the mechanism if a hand enters the protected zone during a cycle. The machine also has an emergency stop, automatic electrical leakage trip, and audible fault alarm.