1.1 Equipment introduction and purpose
1.1.1 : This equipment is a segmented high-pressure defoaming machine (bubble remover machine).--Air Bubble Removing Machine 
It’s widely used for electronics and optoelectronics industry, Removing air bubbles and vacuum bubbles--Air Bubble Removing Machine 
after vacuum lamination with optical glue SCA and OCA glue. Effectively improve product yield.--
Air Bubble Removing Machine 
1.1.2 : Segmented high-pressure , both temperature and pressure can be adjusted by different segmented based on the actual product , max temperature is 80 degree , max pressure is 0.9Mpa--Air Bubble Removing Machine 

1.2 Equipment technical parameters
1.2.1 machine size :
length 3290mm width 1910mm Height 2110mm
1.2.2 Inner chamber size : Diameter 1200mm Depth 1800mm
1.2.3 Gross weight about 1800KG
1.2.3 Safety pressure :0.9mpa
1.2.4 Volatge AC 380V

1.3 Equipment Installation
1.3.1 Power supply, to ensure the power supply demand AC380V 8000W.
1.3.2 Air supply to ensure the air pressure supply 0.8mpa.
1.3.3 Machine installation, 12 casters adjust the horizontal state, and the casters are locked and fixed.--
Air Bubble Removing Machine 

1.4 Equipment maintenance
1.4.1 Circuit maintenance: check whether the circuit is loose or abnormal every 15 working days, Appropriate reinforcement if there is any abnormality--
Air Bubble Removing Machine 

1.4.2 Air circuit maintenance; every 15 working days, check the air circuit for air leakage from the air pipe joints.--Air Bubble Removing Machine 
If there is any abnormality, repair and reinforce or replace it in time

1.4.3 Fan maintenance; manual debugging every 15 working days to check whether the fan is running abnormally, and
replace it in time if there is any abnormality
1.4.4 Add lubricating oil; manually open the door cover of the defoaming machine every 15 working days and add
lubricating oil to the movable place